 |
 |
1111 Lancaster Avenue P.O. Box 990 Rosemont, PA 19010-0911, USA phone: 610-527-1300 or 800-727-1022 fax: 610-527-4463 |
|
|
|
1111 Lancaster Avenue P.O. Box 990 Rosemont, PA 19010-0911, USA phone: 610-527-1300 or 800-727-1022 fax: 610-527-4463 |
| Home | Catalogs | Contact Us | Photos | Search | Site Map |
FOR USE IN FRP, CARBON FIBER, FIBERGLASS, CARBON, FERRITES, BORON, PHENOLICS AND CERAMICS
Cylindrical Style
Ball End Style
| Brazed | Plated | A | B | C | D | # |
Slots W |
D | Grit | ||
| Cylindrical Part No. |
Ball End Part No. |
Cylindrical Part No. |
Ball End Part No. |
||||||||
| 155200 155205 155208 155210 155215 155220 155225 155230 155235 155240 - - - - |
155300 155305 155308 155310 155315 155320 155325 155330 155335 155340 - - - - |
153125 153250 - 153312 153375 153500 153625 153750 153875 153100 154060 154070 154080 154090 |
153905 153910 - 153915 153920 153925 153930 153935 153940 153945 - - - - |
1/8 1/4 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1/2 1/2 1/2 1/4 |
1/8 1/4 1/4 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/4 |
1/2 3/4 1-1/2 1 1 1-1/2 1-1/2 1 1 1 1 1 1 1 |
2 2-1/2 4 3 3 4 4 4 4 5 3 3 3 3 |
2 2 2 2 4 4 4 4 4 4 2 2 2 2 |
.031 .046 .046 .093 .093 .100 .100 .100 .100 .100 1/16 1/16 1/16 1/16 |
.031 .046 .046 .093 .093 .060 .060 .060 .060 .060 1/16 1/16 1/16 1/16 |
40 40 40 40 40 40 40 40 40 40 40 60 120 60 |
| Part MM | Part MM | A | B | C | D | # | W | D | Grit | ||
|
153550 153600 153650 153700 |
153975 153980 153985 153990 |
3.0 6.0 10.0 12.0 |
3.0 6.0 10.0 12.0 |
12.0 19.0 25.0 38.0 |
50.8 63.5 76.2 101.6 |
2 2 4 4 |
.031 .046 .093 .093 |
.031 .046 .060 .060 |
40 40 40 40 |
||
Diamond Discs and Wheels
 |
A new series of Starlite Diamond Discs and Wheels for precise grinding and finishing of small and miniature parts. Gives excellent results on carbide, hardened steel and alloys, ceramics, plastics, etc. These discs and wheels are designed to be run on 1/8" or 3/32" diameter shank removal mandrels. These tools should be operated at a minimum of 5,000 RPM in order to prolong tool life. A coolant in mist form should be applied while the tool is cutting. |
| Specifications for Wheels and Discs | |||||
| Part No. | Diam. " | Width " | Diam. MM | Width MM | Type |
| 151005 151010 151025 151030 151040 |
7/8 7/8 1 1 1 |
.008 .010 .029 .023 .029 |
22 22 25 25 25 |
0.20 0.25 0.70 0.56 0.70 |
Flexible Full both sides Flexible Full both sides Rigid Cut-off Rigid Safe one side Rigid Full both sides |
| Mandrels may be purchased separately. Mandrel part no. 709530 is 1/8" | |||||