 |
 |
1111 Lancaster Avenue P.O. Box 990 Rosemont, PA 19010-0911, USA phone: 610-527-1300 or 800-727-1022 fax: 610-527-4463 |
|
|
|
1111 Lancaster Avenue P.O. Box 990 Rosemont, PA 19010-0911, USA phone: 610-527-1300 or 800-727-1022 fax: 610-527-4463 |
| Home | Catalogs | Contact Us | Photos | Search | Site Map |
 |
Multi Mill Carbide End Mills
for Rockwell 40C and Harder Metals |
This new "star-cut" mill is designed to work hard metals (Rockwell 40C or harder) with greater efficiency than conventional mills. Multimills have also been used with good effect on Titanium, stainless steels, and high-temperature alloys.
| Part Numbers | Dimensions (in MM) | ||||
| Square End |
Ball End |
Cutter Diam. |
Flute Length |
Shank Diam. |
O.A.L. |
| 434200 434205 434210 434215 |
435200 435205 435210 435215 |
3.0 4.0 5.0 6.0 |
12.0 12.0 12.0 19.0 |
3.0 4.0 6.0 6.0 |
38.0 50.0 50.0 50.0 |
| 434220 434225 434230 |
435220 435225 435230 |
8.0 10.0 12.0 |
19.0 22.0 25.0 |
8.0 10.0 12.0 |
60.0 60.0 60.0 |
 |
Solid Carbide Center Laps |
Superfinished cutting edges make these solid Tungsten Carbide Center Laps sharper to start with. And they stay sharper longer. Their microfinish producs finer product finishes. Special sizes can be made to your specifications. Single end, straight shank, RH cutting, 60º incl. angle.
| Part Number | Cutting Diameter |
Shank Diameter |
O.A.L. | No. of Flutes |
| 420100 420105 420110 |
4 mm 6 mm 8 mm |
4 mm 6 mm 8 mm |
38 mm 50 mm 50 mm |
5 5 7 |
| 420115 420120 420125 |
12 mm 16 mm 20 mm |
12 mm 16 mm 20 mm |
50 mm 65 mm 65 mm |
7 9 9 |
See our Discount Information page for Quantity Discounts